The Morgaz Machine 1
From Atlantic Roleplay Wiki
Title: The Morgaz Machine 1
Author: DRA-X-0
--The front cover is decorated with the image of an ouroboros surrounding a gear--
This machine is designed as a fleshcrafter training system. It utilizes physical and elemental forces to attempt to destroy the fleshcrafter, but will stop once the fleshcrafter is overwhelmed and inject them with anti-torporing enhanced blood. The use of this machine by non-fleshcrafters or novices will result in utter destruction. It is not a torture machine and should not be used as such, it will destroy the victim within seconds. For a proper torture machine please consult myself or another technomancer.
--A labeled drawing of the whole machine, with numbered lines pointing to specific parts--
1 - elemental control unit
2 - reaction controller
3 - central body chassis
3a - barrage system
3b - arcana observance system
3c - engine unit and arm motion system
4 - emotive projection drive
5 - diligence conversion drive
6 - chemical delivery system
1 - Elemental control unit
--A drawing of a long device with a series of labeled power crystals on it, and rows of arcane gems---
The elemental control unit is used to send out bursts of raw energy, as well as cast spells onto the fleshcrafter. The power crystals contain each of the basic four elemental energies which can be sent out in their raw form, or drawn from by the arcane gems with spell casting. Each arcane gem contains instructioning for a single spell, this particular device is designed to hold 32 arcane gems but could be expanded upon if more spells are required. The elemental control unit is called from the reaction controller (2), and returns the requested spell or raw energy. From there, it is sent to the arcana-observance system
(3b). The controlling gems for this device are numbered 1 and 2 on the diagram, and handle interaction with the reaction controller (2).
--Lines of instructioning for the controlling gems, and then for the spell gems--
2 - Reaction controller
--A drawing of a cluster of arcane gems with several wires coming from them, arrows pointing and numbering each gem--
This device is connected to the arcana-observance system(3b), it monitors the fleshcrafter's actions to determine how to change its assaults if the fleshcrafter has created a defense. It also executes random assaults to prevent the machine from becoming predictable.
It monitors recovery time from assaults and stores effective combinations to use again. The second purpose of the system is to monitor the fleshcrafter's blood levels, reaction time, and movement in a way to determine if it has been defeated or not. It is absolutely the most vital system in the machine to create properly, as otherwise the machine may destroy the fleshcrafter using it.
--More drawings of the controller from different angles, and cross sections--
--An entire page in small writing dedicated to the gem instructioning for each of the arcane gems in the cluster--
3 - Central Body Chassis and its components
--A full page drawing of the chassis and its related parts--
The body chassis is where the fleshcrafter places itself to use the machine. The four sides will close tightly around it, the offensive implements pressing into the fleshcrafter.
NOTE: THIS PART ALONE WILL KILL ANY NON-FLESHCRAFTER PLACED INTO THE MACHINE. IT IS NOT A TORTURE DEVICE, THE DEATH WILL BE NEARLY INSTANT AND PAINLESS
AND THE RESULT WILL BE A DIFFICULT TO CLEAN MESS.
This section details the three major components attached to the chassis: The barrage system, the arcana-observance system, and the engine system. When constructing the metal components, ensure highly durable metals are used to withstand high pressure. Also consider which, if any, acids will be used by the machine, and ensure the metals used will not react with them.
3a - The barrage system.
--Drawings of circle saws, curve-thorned circle rasps, and various bladed saws, some having additional raspy barbs along the sides--
The barrage system is designed to be highly durable and cause maximum flesh and bone damage. As long as it is connected to the engine(3c), its components will run. The reaction controller(2) handles turning the barrage parts on and off.
3b - The arcana-observance system
--Drawings of the various needles, picks, and jabbing instruments attached to the chassis, each one labeled--
Elemental pick, elemental pin: Used for transferring magic and energy into the fleshcrafter.
Injectory pick: Used to inject chemicals during testing, including mind altering drugs and corrosives.
Barbed piercer: Highly durable, is designed to pierce chitin and shell and cause maximum damage to the surrounding flesh after doing so.
--Drawings of cross sections of each part--
Each pick and needle contains crystals written to monitor fleshcrafter status. This serves to determine what defensive maneuver the fleshcrafter is taking and counter it, as well as allow the machine to recognize when the fleshcrafter is defeated.
--Lines of gem instructioning for the monitoring crystals--
3c - Engine system
This is the system that moves 3a and 3b. It requires little instructioning, the reaction controller turns each arm on and off as necessary.
--A drawing of of a device with several power crystals attached, several pistons and modulator gems around the sides of the power crystals. Gears, belts, and chains come off the sides of the machine, connecting with the chassis arms--